2. Products
  3. Transmitter/Receiver
  4. CDP-TX/RX-02F-R , CDP-TX/RX-02FP-R
  5. Development tools

Wireless module product information, such as a wireless modem - CIRCUIT DESIGN,INC.

Product Overview

Development tools of CDP-TX-02FP-R and CDP-RX-02FP-R



The test boards were developed to demonstrate and use the CDP-TX-02FP-R and CDP-RX-02FP-R. Besides this it is possible to develop original software for these boards.
The kit consists of a transmitter input board (TB-CDPTX-02), receiver output board (TB-CDPRX-02) and a CD containing technical documents.

In combination with the radio modules, it is a full 8-channel digital status translator that can be used for various practical applications.

The test boards are designed for the new 128channel transmitter CDP-TX-02FP-R and receiver CDP-RX-02FP-R with pin connectors for channel selection.

Features of the status translation Back to top of the page

TX board: 8 inputs (optocoupler) & RX board: 8 outputs (photo MOS relays).
Manual and automatic channel control
Different transmission types (test mode, continuous mode, triggered mode)
Learning and pairing mode (TX 1 : RX N or TX N : RX 1)
8 monitoring LEDs on the receiver board
Data packets with CRC16 checksum
Fail safe mode with max error count
Calibrated to -116dBm for automatic channel control

Features of the development set Back to top of the page

Fully programmable Atmel® ATMEGA324P over ISP port
32 KB internal flash and 2 KB EEPROM for original software
2 UART ports for CDP-02 and debugging/data transmission and reception
3 DIP switches for configuration
Complete documented source code for status transmission

Technical documentation provided on the CD Back to top of the page

Operation guide Circuit diagram BOM (parts list)
PCB pattern drawing Programming guide Complete C source code

Technical support and warranty Back to top of the page

Reimesch Kommunikationssysteme GmbH provides technical support and warranty for the TB-CDP02-TX and TB-CDP02-RX under their policy. Please contact Reimesch for questions.
Circuit Design, Inc. believes the finished information is accurate and reliable, however, customers are advised to consult with Reimesch before ordering since Reimesch may make changes to the product for improvement without notice.


Reimesch Kommunikationssysteme GmbH

Official Technical Support Partner and Distributor of Circuit Design RF modules
Friedrich-Ebert-Str. 1
D-51429 Bergisch Gladbach, Germany
Telephone: +49 (0) 2204 / 58 47 51
Fax: +49 (0) 2204 / 58 47 67


Reimesch designs, manufactures and sells the TB-CDP02-TX and TC-BDP02-RX. They are an Official Technical Support Partner and Distributor of Circuit Design RF modules. Circuit Design initiated the concept of the TB-CDP02-TX and TB-CDP02-RX, and Reimesch carried out the design work based on their RF design and application experience in SRD while taking the industrial environment and preference of users in Europe into consideration.

Back to top of the page